DIY & Flatpacks

Do you have the dream of travelling this beautiful country in your own Motorhome?

We can help. Not only can we build it for you but we also appreciate the DIY customers that enjoy installing and creating their Journey with their own hands and our backup support

We are just here to make it easier by offering flat pack kits that are easy to install.. I.e no measuring and cutting we do all that for you so all you have to do in install it.

​We will also be there for any questions you may have during your build.

​So if your looking for a professional fit out built by professional tradesman plus you can say you did it yourself then try our DIY Flatpack kits.. You will be surprised what you can achieve.

The 5 steps to your dream (DIY)

A. PREPARE

Preparation makes your job easier as you go through each stage so think of it as the most important step.

Firstly decide if the vehicle requires any mechanical or body work and if that needs to be done prior to installation.

Once vehicle ready to go take out all aspects of the vehicle you don’t need (seats, racks etc)

Take out everything you don’t need (Seats, floor heaters, storage racks etc.)

Take out the ceiling panels (you can re-use them as is, trim, or replace with a different kind of sheeting. The aircon ducting needs to be cut out where the shower, fridge and any high cabinets or overheads will go. Before you start contact us or check the Overhead cabinet instructions as you will need parts of the ducting moulding.

Prep the floor. If you want to use vinyl you need to create a smooth surface. Before laying down the new floor cut all your steel work. As you know the lay out you can cut all openings for roof vents, aircon, hot water service, gasbox etc. Make sure you make a plan of what you want to place on the roof i.e solar, aircon, ariel etc. and cross check it with the interior.

B Exterior fittings / wiring / plumbing /trim

With the new floor down you have a nice clean platform to start building your dream ! Everything is still easily accessible so now is the time to :

Run all your wiring. 240 V installation need to be done by a licensed electrician but some electricians allow you to run the wiring so if you decide to run the wiring prior draw a plan prior to ensure you put all the right wires in the correct place
Fit watertanks and run all plumbing.
Fit awning, solarpanels, roof hatches, aircon, water filler, gasbox, hotwaterservice, TV aerial.

C Assembling interior units

Start pre-assembling all flat pack units. Make sure you have a nice big clean work area to ensure you can do this comfortably

D Installation

This is the exciting part… In ways your project will transform from an empty shell into a motorhome. After installing all carcasses units they can be finished off by hanging the doors and fitting drawers, hatches on the bed and benchtops on the kitchen units.

E Finishing

Now that all units are in place all that remains is finishing off the plumbing of toilet, kitchen sink & tap, shower door and 12V installation.

​Your electrician and and gasfitter can now come in to finish the 240V and gas installation. Be certain to get your gas certification and 240V certificate (We can help with this if required)

Whats included in your Kits

  • Instruction Manuals – Detailed to ensure installation is a breeze
  • Cut to size panels – All Holes, corners etc no more cuts required
  • Required hardware – Nails, Screws, hinges etc required to complete the job
  • Support – If you need a hand just let us know we are here to help you complete your dream

Now your ready to travel and enjoy your Motorhome with peace of mind. Let the good times roll on the open road….
 
 

 
 

PRICING

Single Bed Flatpack Kit For Toyota Coasters

Includes

  • Kitchen (with 4 draws, 2 cupboards and Hand form top) fits over battery access hatch (No sink or cooktop)
  • Large Lounge (behind driver seat with cloth trimming
  • Small Lounge (for behind passenger seat with cloth trimming)
  • Show (fibre glass with pull out door and colour MDF side strips. (No toilet No Showhead)
  • Single Beds x 2 (frame, sides and tops)
  • Bed side draw for single bed
  • Hanging Locker
  • Under fridge drawer and top cupboard (for 140-L waeco fridge (not included)

$12, 321 (SAVE $1000) Includes GST

Island Bed Flatpack Kit for Toyota Coasters

Includes

  • Kitchen (with 4 draws, 2 cupboards and Hand form top) fits over battery access hatch (No sink or cooktop)
  • Large Lounge (behind driver seat with cloth trimming
  • Small Lounge (for behind passenger seat with cloth trimming)
  • Show (fibre glass with pull out door and colour MDF side strips. (No toilet No Showhead)
  • Island Bed (frame, sides walkways and tops)
  • Bedside draw x2 for Island bed
  • Hanging Locker
  • Under fridge drawer and top cupboard (for 140-L waeco fridge (not included)

$12, 166 (SAVE $1000) Includes GST

Individual Pieces for Toyota Coasters

Inc GST

Kitchen (with 4 draws, 2 cupboards and Hand form top) fits over battery access hatch (No sink or cooktop) $1900
Large Lounge (behind driver seat with cloth trimming $2486
Small Lounge (for behind passenger seat with cloth trimming) $1295
Shower (fibre glass with pull out door and colour MDF side strips. (No toilet No Showhead) $3500
Single Beds x 2 (frame, sides and tops) $1530
Island Bed (frame, sides, walkways and tops) $1520
Bed side draw for single bed $790
Bed side drawers x2 for island bed $645
Hanging Locker $900
Hanging Locker all shelves $950
Pantry (with 2 doors and 6 slide out baskets) $1235
Passenger side cupboard $990
Under fridge drawer and top cupboard (for 140L Waeco fridge (not included) $830
Fridge tower with top cupboard (for 190L Waeco fridge (not included) $534

For more information please fill in the below form and we will get back to you as soon as possible

FREE Information Pack

 
 

X